Directory Number (Dn) - Panasonic KX-T336 System Reference Manual

2.00 Directory Number (DN)
Description
<Example>
Directory numbers are the software type logical
numbers which are programmed to match the
hardware type physical numbers (port numbers)
attached to ports of extensions.
Accordingly, directory numbers are extension
numbers.
System-Numbering Plan
F--S------------------------' ----r---~---~----~----,
1 No. 1 Feature
; DGll DG21 DG31 DG41
;-
' T------------------------;----:---;---~----~---~
; 1 ; 1 st Hundred Block Extension ; 5 f : - ; - ;-
r--T----------------- -------,----r---1---
-r----l
; 2 ;2nd Hundred Block Extension ; 6 ; ; - ; - i
r--+------------------------t
----p---*----p---,
1
Directory numbers are assigned in "Configuration-
DN Assignment" to be three or four digits.
Only numeric characters "0 to 9" can be used as a
Directory Number.
D' lrec o t ry number setting follows the setting in
"System-Numbering Plan", 1 st Hundred Block
Extension through 16th Hundred Block Extension.
Programming
I
System Programming
Reference
VT 1 Dumb
Numbering Plan (l/9)
I 3 !3rd Hundred Block Extension i 7 : 0 : - f - I
c--+------------------------i------~---~----~---~
i 4 /4th Hundred Block Extension i 8 [ 0 i - i - i
DNs from 8000
to
8099
are assignable.
DNs from 7000 to 7099 are assignable.
DNs from 600 to 699 are assignable.
DNs from 500 to 599 are assignable. p
' Configuration-DN Assignment"
9-c-3.00 lo-c-3.00
. "System-Numbering Plan (l/9) (2/g)", 9-D-6.01 10-C-10.00
1 st Hundred Block Extension 9-D-6.02
.
.
I
16th Hundred Block
Extension
I I I
. .
Conditions
There are two types of directory numbers: the
Primary Directory Number (PDN) and the
Secondary Directory Number (SDN).
For further details of PDN, refer to Section 4-B-3.01
"PDN Butto??' For SDN, refer to' Se&ion 4-B-3.02
"SDN Button."
If you assign only one digit in "System-Numbering
Plan", 1 st Hundred Block Extension through 16th
Hundred Block Extension, you can assign three-
digit DNs which start with the pre-assigned digit in
"Configuration-DN Assignment."
If you assign leading two digits in "System-
Numbering Plan," you can assign fourdigit DNs
which start with the pre-assigned two digits in
"Configuration-DN Assignment."
3-B-5