3-F-L 1; Co Busy Cut - Panasonic KX-T336 System Reference Manual

8.00
CO Busy Out
Description
Operation
Setting CO Busy Out to a CO line (from operator
1)
Allows the operator 1 (extension user or attendant
console) to busy out the invalid CO lines.
Any user (including the operator at attendant
console) cannot seize the busied-out CO lines.
To busy out the invalid CO line, dial the feature
number for "Busy Out Trunk" and trunk port
physical number of the associated CO line.
To return the busied-out CO line to service, dial the
feature number for "Unbusy Trunk" and trunk-port
physical number of the associated CO line.
1. Lift the handset or press the SP-
PHONE button.
l
You hear dial tone.
2. Dial the feature number for "Busy
Out Trunk" and trunk port physical
number.
It is assignable to busy out the invalid CO lines
automatically by using ABC command at dumb
programming mode.
Refer to Section 1 O-C-50.00 "Automatic Busy-Out
Count (ABC)n for further information.
For CO Busy Out from Attendant Console, refer to
Section 6-J-l 0.00 "CO Access Control."
l
You hear confirmation tone.
l
If your PITS has a display, it
shows:
1 Busy Out: T xxxx 1
-?-
Programming
Reference
System Programming
v-r Dumb
System-Numbering Plan (9/g)", 9-O-6.09 104-10.00
Busy Out
Trunk
Unbusy Trunk
"Automatic Busy-Out Count -
10-c-50.00
(ABC)"
Trunk port physical
number
3. Replace the handset or press the
SP-PHONE button.
Canceling CO Busy Out (from dperator 1)
1. Lift the handset or press the SP-
PHONE button.
Conditions
None
l
You hear dial tone.
__
9 13
q
2. Dial the feature number for
45s
,a*
"Unbusy Trunk" and trunk port
Is
physical number.
l
You hear confirmation tone.
l
If your PITS has a display, it
shows:
1 Unbusy: T xxxx 1
T
Trunk port physical
number
3. Replace the handset or press the
SP-PHONE button.
3-F-l 1