Attendant Console-Less Operation; Direct In Line (Dil) - Panasonic KX-T336 System Reference Manual

2.00 Attendant Console-less
Operation
2.01 Direct In Line (DIL)
Description
.-
Once set in system program, this function makes
it possible for an incoming call from a CO line to
go directly to an-extension without assistance of
the attendant.
This function can be performed in two ways, as
described below.
DIL 1 :l : For putting an incoming call from a CO
line trunk to a single destination
Assignable destinations are:
l
Extension User
.,.i .'.'
l
FDNfor Remote
l
FDN for UCD group
DIL 1: N: For putting an incoming call from a CO
line to a maximum of eight destinations
simqltaneously
Assignable destinations are:
l
Extension User
l
Pickup Group
l
ICM Group
For DIL 1 :l , set "Group-Trunk Group", Incoming
Mode (Day) to OIL 1:1, and program the CO
line to thii Trunk Group using Trunk- CO Line",
Trunk Group. Then set the incoming destination
in "Trunk-CO Line", Direct Termination.
For DIL 1: N, program "Group-Trunk Group",
Incoming Mode (Day) to DIL 1: N, and program
the "Group-Trunk Group", Destination (DIL 1: N
Only) Type and Number.
To use these functions in the Night mode, set the
Day mode to the DIL
1 :l
or DIL 1: N setting, and
set "Group-Trunk Group", Incoming Mode (Night)
to Day Mode.
Programming
DIL 1:l
System Programming
Refc
VT
"Group-Trunk Group (l/2)",
Incoming Mode (Day)
Incoming Mode (Night)
"Trunk-CO Line",
Trunk Group
Direct Termination
9-E-1.01
SF-1 .oO
rence
Dumb
10-C-14.00
lO-Gl8.00
DILl:N
System Programming
Reference
*
VT 1 Dumb
I I
-Group-Trunk Group (1 R)",
9-E-l .Ol
Incoming Mode (Day)
Incoming Mode (Night)
"Group-Trunk Group (2Q)".
9-E-l .02
Destination (DIL 1: N Only)
Type and Number
10-C-14.00
r
10-C-15.00
;d use the DIL 1 :l and DIL
1:
N'&ctions,
program "Group-Trunk Group",IncomingKIutgoing
to Both-Way or Incoming Only.
Conditions
If CO buttons are assigned, an incoming call to a
PITS will arrive at one otthe CO buttons (except
PC0 button). lf no CO button is assigned, it will
arrive at a PDN.
When a DIL 1
:l
incoming call arrives at a PDN. it
will also arrive at a PITS having a SDN whose
owner is that PDN.
When a DIL 1: N incoming call arrives at a PDN,
it will not arrive at a PITS having a SDN whose
owner is that PDN.
It is programmable that an incoming CO call
routed via DIL 1 :N feature anives at "CO button
only" or "CO button or PDN button." For further
information, refer to Section 1 O-C-53.00 "World
Select 3 (WS3)."
3-D-3