Panasonic KX-T336 System Reference Manual page 198

1.01 Load Sharing
Description
When two attendant consoles are equippec
with the
KX-T336 system,
incoming calls directed to the attendant
console
are distributed to each
console evenly so that both consoles can
share the same
load.
KX-T336 System
Al-T.1
1st -------_-------.._-----------------
3rd _ _ _ _ _ _ _ _ _ _ _ _ _ _ _. . __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ - -
71
2nd
-----_-_------_..---________________L
4th
---------------..------------------
Incoming call
Ll
Al-f2
In Dual Console Operation mode, "Load Sharing" is the default setting.
This setting can be changed to one of the following other two settings by
using the WS3 command at Dumb programming mode.
l
Simultaneous Ringing (Section 3-D-l .02)
l
Interconsole IRNA (Section 3-D-l .03)
Refer to Section 10-C-53.00 "World Select 3 (WS3)" for further information.
Programming
Conditions
I
System Programming
Reference
VT 1 Dumb
"Group-Trunk Group (1 LZ)",
Incoming Mode (Day)
"World Select 3 (wS3)".
9-E-1.01 10-G14.00
1o-c-53.00
. .
1. General and Specific Calls
Incoming outside calls directed to the attendant console are categorized as
"General" or "Specific."
(General Calls)
l
Operator Call (General)
l
Incoming outside calls routed via CO lines which belong to a Trunk
Group whose Incoming Mode (Day) is "ATT."
l
FDN for General Operator Call
(Specific Calls)
l
Operator Calls (Specific)
- Directory Number for ATT1 and 2
2. Call Distribution Order
General calls are distributed to each console on the basis of "First In First
Out."
Specific
calls always arrive at the specified attendant console.
3-D-2-l
(30393)