Table of Contents
Advertisement
3)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[1]
[2]
[3]
[SHARPNESS]
You can adjust the sharpness of the projected image.
1)
Press as to select [SHARPNESS].
2)
Press qw or the <ENTER> button.
f The [SHARPNESS] individual adjustment screen is displayed.
3)
Press qw to adjust the level.
Operation
Press w .
Press q .
Note
f If you press w while the adjustment value is [+15], the value will become [0]. If you press q while the adjustment value is [0], the value will
become [+15].
[NOISE REDUCTION]
You can reduce noises when the input image is degraded and noise is occurring in the image signal.
1)
Press as to select [NOISE REDUCTION].
2)
Press qw or the <ENTER> button.
f The [NOISE REDUCTION] individual adjustment screen is displayed.
3)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[1]
[2]
[3]
Attention
f When this is set for an input signal with less noise, the image may look different from the original image. In such a case, set it to [OFF].
Note
f In the following cases, the [NOISE REDUCTION] function is disabled.
g When a signal with the resolution of 2 560 x 1 600, 3 840 x 2 160, or 4 096 x 2 160 is input
g When [EDGE BLENDING] is set to anything other than [OFF]
[DYNAMIC CONTRAST]
Light adjustment of the light source and signal compensation are performed automatically according to the image
to make the contrast optimum for the image.
1)
Press as to select [DYNAMIC CONTRAST].
2)
Press qw or the <ENTER> button.
f The [DYNAMIC CONTRAST] individual adjustment screen is displayed.
3)
Press qw to switch the item.
f The items will switch each time you press the button.
Chapter 4 Settings — [PICTURE] menu
No correction.
Corrects the image to weaken vividness.
Corrects the image to medium vividness.
Corrects the image to high vividness.
Adjustment
Contours become sharper.
Contours become softer.
No correction.
Slightly corrects the noise.
Moderately corrects the noise.
Strongly corrects the noise.
Range of adjustment
0 - +15
ENGLISH - 73
Advertisement
Table of Contents
