[Initialize] - Panasonic PT-FRQ60WU7 Operating Instructions Manual

Note
f If the CEC-compatible device does not support CEC 1.4, it may not support the link control described in the manual.
f Depending on the connected CEC-compatible device, the link control may not operate normally.

[INITIALIZE]

Return various setting values to their factory default settings.
1) Press as to select [INITIALIZE].
2) Press the <ENTER> button.
f The [SECURITY PASSWORD] screen is displayed.
3) Enter a security password and press the <ENTER> button.
f The [INITIALIZE] screen is displayed.
4) Press as to select an item to initialize.
[USER SETTINGS]
[REGISTERED SIGNAL ONLY]
[NETWORK/E-MAIL ONLY]
[LOGO IMAGE ONLY]
[UNIFORMITY ONLY]
[FACTORY RESET]
f Proceed to Step 5) when anything other than [USER SETTINGS] is selected.
5) Press the <ENTER> button.
f The confirmation screen is displayed.
6) Press qw to select [OK], and press the <ENTER> button.
Note
f The security password is the password set in the [SECURITY] menu → [SECURITY PASSWORD CHANGE]. Initial password as the factory
default: awsqawsq
f To delete only a part of a registered signal, delete it following "Deleting the registered signal" ( x page 130).
f To return the setting of [Time Zone] in the [Adjust clock] page of the web control screen and the setting of the [PROJECTOR SETUP] menu
→ [DATE AND TIME] → [TIME ZONE] to the factory default settings, initialize them by one of the following methods.
g Initializing by selecting the [PROJECTOR SETUP] menu → [INITIALIZE] → [FACTORY RESET]
g Initializing by setting the [PROJECTOR SETUP] menu → [INITIALIZE] → [USER SETTINGS] → [OTHER USER SETTING] to [INITIALIZE]
f The self-signed certificate already created in the [Certificate] page of the web control screen or the information of the server certificate
already installed can be deleted in the web control screen.
f If initialized by selecting [FACTORY RESET], the [INITIAL SETTING] screen is displayed when the projection is started the next time.
Initializing the settings by selecting the items
1) Press as to select [INITIALIZE].
2) Press the <ENTER> button.
f The [SECURITY PASSWORD] screen is displayed.
3) Enter a security password and press the <ENTER> button.
f The [INITIALIZE] screen is displayed.
4) Press as to select [USER SETTINGS].
5) Press the <ENTER> button.
f The [USER SETTINGS] screen is displayed.
Chapter 4 Settings — [PROJECTOR SETUP] menu
The user data to return to factory default settings can be selected arbitrarily.
The projector goes into the standby status after executing [INITIALIZE].
For details of operation, refer to "Initializing the settings by selecting the items" ( x page 127).
Deletes all the signals registered in [SIGNAL LIST]. All the setting values saved for each registered
signal are also deleted.
Returns all the setting items under the [NETWORK] menu and all the setting items under the
operation page in the [Detailed set up] page and the Crestron Connected of the web control screen to
the factory default settings.
f The items of [Time Zone], [Date], and [Time] in the [Adjust clock] page of the web control screen do
not return to the factory default settings.
f The information such as the self-signed certificate already created in the [Certificate] page of the
web control screen or the server certificate already installed is not deleted.
Deletes the image registered in [USER LOGO].
Sets the setting of the [DISPLAY OPTION] menu → [UNIFORMITY] to the factory default setting.
Returns all the user data settings to the factory default settings. The projector goes into the standby
status after executing [FACTORY RESET].
ENGLISH - 127