Panasonic PT-FRQ60WU7 Operating Instructions Manual page 177

[Administrator]
The user name and password of the administrator account can be set.
1 [Account]
Displays the account to change.
2 [Current]
[User name]:
Enter the user name before the change.
[Password]:
Enter the current password.
Note
f To change the setting of the administrator account, entry of [User name] and [Password] in [Current] is required.
f When the projector is already registered in application software (such as "Multi Monitoring & Control Software") which uses the
communication control via LAN, communication with the projector will become impossible if the user name or password for [Administrator] is
changed. If the user name or password for [Administrator] is changed, update the registration information of the application software in use.
[User]
The user name and password of the standard user account can be set.
1 [Account]
Displays the account to change.
2 [New]
[User name]:
Enter the desired new user name. (Up to 16 characters in single
byte)
[Password]:
Enter the desired new password. (Up to 16 characters in single
byte)
[Password(Retype)]:
Enter the desired new password again.
Chapter 5 Operations — Using the web control function
1
2
3
4
3 [New]
[User name]:
Enter the desired new user name. (Up to 16 characters in single
byte)
[Password]:
Enter the desired new password. (Up to 16 characters in single
byte)
[Password(Retype)]:
Enter the desired new password again.
4 [Change]
Determines the change of password.
1
2
3
3 [Change]
Determines the change of password.
ENGLISH - 177