Table of Contents
Advertisement
5)
Click [Execute].
f The server certificate and the intermediate certificate are installed into the projector.
6)
Click [OK].
Note
f To confirm the information of the installed server certificate, refer to "Confirming the information of the server certificate" ( x page 169).
Confirming the information of the server certificate
Confirm the information of the server certificate installed in the projector.
1)
Click [Certificate] → [Server Certificate] → [Information] → [Confirm].
f The information of the installed server certificate is displayed. The details of each item are as follows.
Item
[Common Name]
[Country]
[State]
[Locality]
[Organization]
[Organization Unit]
[Not Before]
[Not After]
[CRT key]
Note
f The installed server certificate and the intermediate certificate can be deleted by clicking [Certificate] → [Server Certificate] → [Delete].
However, it cannot be deleted when [HTTPS set up] → [Connection] is set to [HTTPS]. Delete it after changing the setting to perform the
HTTP communication.
To delete the server certificate within the valid period, confirm that the certificate file used for installing is available on hand. It will be
necessary when installing the server certificate again.
Generating the self-signed certificate
When the server certificate issued by the certification organization is not to be used as the security certificate, it
is possible to use the self-signed certificate generated in the projector. Generate the self-signed certificate after
generating the CRT key.
1)
Click [Certificate] → [Self-signed Certificate] → [Generate] → [Execute].
f The page to generate the self-signed certificate is displayed.
2)
Enter the information required for generation.
f The details of each item are as follows.
Chapter 5 Operations — Using the web control function
The projector name or the IP address is displayed.
The country code defined in ISO 3166-1 alpha-2 (two upper case alphabets) is displayed.
The State, etc. is displayed.
The locality is displayed.
The organization name is displayed.
The organization unit name is not displayed. It is displayed as an asterisk.
Displays the date and time that the self-signed certificate was issued.
Displays the date and time that the self-signed certificate will expire.
[RSA key size]
The key length of the CRT key is displayed.
[Last modified]
The generation date and time of the CRT key is displayed.
Details
ENGLISH - 169
Advertisement
Table of Contents
