Table of Contents
Advertisement
Setting [KEYSTONE] or [CURVED CORRECTION]
1)
Press as to select [GEOMETRY].
2)
Press qw to select [KEYSTONE] or [CURVED CORRECTION].
3)
Press the <ENTER> button.
f The [GEOMETRY:KEYSTONE] or [GEOMETRY:CURVED CORRECTION] screen is displayed.
4)
Press as to select the item to adjust.
5)
Press qw to adjust.
[LENS THROW RATIO]
Set the throw ratio.
Select the value close to the actual projection distance divided by projected image width here.
[VERTICAL KEYSTONE]
[VERTICAL BALANCE]
Adjust the setting according to the lens shift range in the vertical
direction.
[FREE GRID]
Finer adjustment is possible by selecting the points or lines to be corrected.
For details of operation, refer to "Adjusting distortion with [FREE GRID]" ( x page 81).
[LENS THROW RATIO]
Set the throw ratio.
Select the value close to the actual projection distance divided by projected image width here.
[VERTICAL KEYSTONE]
[VERTICAL ARC]
[VERTICAL BALANCE]
Chapter 4 Settings — [POSITION] menu
[KEYSTONE]
[CURVED CORRECTION]
[HORIZONTAL KEYSTONE]
[HORIZONTAL BALANCE]
Adjust the setting according to the lens shift range in the horizontal
direction.
[HORIZONTAL KEYSTONE]
[HORIZONTAL ARC]
[HORIZONTAL BALANCE]
ENGLISH - 79
Advertisement
Table of Contents
