Table of Contents
Advertisement
Chapter 3 Basic Operations — Operating with the remote control
Adjusting the volume
Adjust the volume of audio output.
button
1)
Press the <VOL-> button/<VOL+> button on the remote control.
<VOL+>
<VOL->
Note
f This operation can be also performed using qw on the control panel.
Using the freeze function
The projected image can be paused and audio can be turned off regardless of the playback of the external device.
button
1)
Press the <FREEZE> button.
f The image freezes and audio is muted.
2)
Press the <FREEZE> button again.
f Freezing of the image is canceled and audio is turned on.
Note
f [FREEZE] is displayed on the screen when video is paused.
f When freezing of the moving image is canceled, the image may disappear or be disrupted temporarily.
Using the on-screen display function
Turn off the on-screen display function (no display) when you do not wish the viewers to see the on-screen display,
such as the menu or the input terminal name.
button
1)
Press the <ON SCREEN> button.
f The on-screen display disappears.
2)
Press the <ON SCREEN> button again.
f The on-screen display appears.
Note
f If you press the <MENU> button on the control panel for at least three seconds while the on-screen display is off (hidden), the on-screen
display is turned on.
Using the automatic setup function
The image position when the HDMI signal is input, or the resolution, clock phase, and image position when the
analog RGB signal is input can be adjusted automatically. (Analog RGB signal is a signal structured with dots just
like the computer signal.)
It is recommended to input an image with bright white borders at the edges and high-contrast black and white
characters when the automatic adjustment is being performed.
Increases the volume.
Decreases the volume.
ENGLISH - 57
Advertisement
Table of Contents
