Table of Contents
Advertisement
4)
Press the <ENTER> button.
f The [COLOR TEMPERATURE] screen is displayed.
5)
Press as to select [WHITE BALANCE].
6)
Press the <ENTER> button.
f The [WHITE BALANCE] screen is displayed.
7)
Press as to select [WHITE BALANCE HIGH] or [WHITE BALANCE LOW].
8)
Press the <ENTER> button.
f The [WHITE BALANCE HIGH] screen or the [WHITE BALANCE LOW] screen is displayed.
9)
Press as to select [RED], [GREEN], or [BLUE].
10) Press qw to adjust the level.
Item
[RED]
[GREEN]
[BLUE]
Note
f Adjust [COLOR TEMPERATURE] correctly. All colors will not be displayed properly unless adequate adjustment is made. If the adjustment
does not look suitable, you can press the <DEFAULT> button on the remote control to return the setting for the selected item only to the
factory default setting.
Adjusting to desired white balance based on existing color temperature settings
1)
Press as to select [COLOR TEMPERATURE].
2)
Press qw or the <ENTER> button.
f The [COLOR TEMPERATURE] individual adjustment screen is displayed.
3)
Press qw to select anything other than [DEFAULT], [USER1], or [USER2].
4)
Press the <ENTER> button.
f The [CHANGE TO *****] screen is displayed.
5)
Press as to select [USER1] or [USER2].
6)
Press the <ENTER> button.
f The confirmation screen is displayed.
7)
Press qw to select [OK], and press the <ENTER> button.
f The [USER1] or [USER2] data is overwritten.
f The data is not overwritten when [CANCEL] is selected with qw and the <ENTER> button is pressed.
f The [WHITE BALANCE HIGH] screen is displayed.
8)
Press as to select [RED], [GREEN], or [BLUE].
9)
Press qw to adjust the level.
Note
f Adjust [COLOR TEMPERATURE] correctly. All colors will not be displayed properly unless adequate adjustment is made. If the adjustment
does not look suitable, you can press the <DEFAULT> button on the remote control to return the setting for the selected item only to the
factory default setting.
f When color temperature has been changed, the colors before and after the change will differ slightly.
70 - ENGLISH
Chapter 4 Settings — [PICTURE] menu
Operation
Adjustment
Press w .
Deepens red.
Press q .
Weakens red.
Press w .
Deepens green.
Press q .
Weakens green.
Press w .
Deepens blue.
Press q .
Weakens blue.
Range of adjustment
[WHITE BALANCE HIGH]: 0 - +255 (factory default is +255)
[WHITE BALANCE LOW]: -127 - +127 (factory default is 0)
Advertisement
Table of Contents
