Table of Contents
Advertisement
[PICTURE] menu
On the menu screen, select [PICTURE] from the main menu, and select an item from the sub-menu.
Refer to "Navigating through the menu" ( x page 63) for the operation of the menu screen.
[PICTURE MODE]
You can switch to the desired picture mode suitable for the image source and the environment in which the
projector is used.
1)
Press as to select [PICTURE MODE].
2)
Press qw or the <ENTER> button.
f The [PICTURE MODE] individual adjustment screen is displayed.
3)
Press qw to switch the item.
f The items will switch each time you press the button.
[STANDARD]
[CINEMA]
[NATURAL]
[REC709]
[DICOM SIM.]
[DYNAMIC]
[GRAPHIC]
Note
f The factory default picture mode is [GRAPHIC] for computer signal input and [STANDARD] for video signal input.
f Rec.709 is an abbreviation of "ITU-R Recommendation BT.709" and is a color standard of high-vision broadcasting.
f DICOM is an abbreviation of "Digital Imaging and COmmunication in Medicine" and is a standard for medical imaging devices. Although the
DICOM name is used, the projector is not a medical device, and display images should not be used for medical purposes such as diagnosis.
[CONTRAST]
You can adjust the contrast of the colors.
1)
Press as to select [CONTRAST].
2)
Press qw or the <ENTER> button.
f The [CONTRAST] individual adjustment screen is displayed.
3)
Press qw to adjust the level.
Operation
Press w .
Press q .
Attention
f Adjust the [PICTURE] menu → [BRIGHTNESS] first when you need to adjust the black level.
[BRIGHTNESS]
You can adjust the dark (black) part of the projected image.
1)
Press as to select [BRIGHTNESS].
2)
Press qw or the <ENTER> button.
f The [BRIGHTNESS] individual adjustment screen is displayed.
3)
Press qw to adjust the level.
Operation
Press w .
Press q .
68 - ENGLISH
Chapter 4 Settings — [PICTURE] menu
The image becomes suitable for video images in general.
The image becomes suitable for movie contents.
The image becomes suitable for using in a relatively dark environment.
The image becomes Rec.709 compliant when the setting other than [PICTURE MODE] is set to the
factory default.
The image becomes similar to that of DICOM Part 14 Grayscale Standard.
The light output is maximized for use in bright areas.
The image becomes suitable for input from the personal computer.
Adjustment
The screen becomes brighter.
The screen becomes darker.
Adjustment
Increases the brightness of the dark (black) parts of the screen.
Reduces the brightness of the dark (black) parts of the screen.
Range of adjustment
-31 - +31
Range of adjustment
-31 - +31
Advertisement
Table of Contents
