Table of Contents
Advertisement
Generating the signing request
When using the server certificate issued by the certification organization as a security certificate, generate a
signing request necessary for application of issuing to the certification organization. Generate the signing request
after generating the CRT key.
1)
Click [Certificate] → [Generate Certificate Signing Request] → [Execute].
f The page to generate the signing request is displayed.
2)
Enter the information required for application.
f The details of each item are as follows. Enter the information following the requirement of the certification
organization to apply.
Item
[Common Name]
[Country]
[State]
[Locality]
[Organization]
[Organization Unit]
[CRT key]
3)
Click [OK].
f The signing request file is generated. Enter a file name and save the file in the desired folder.
4)
Enter a file name and click [Save].
f The file for signing request is saved in the specified folder.
Note
f The characters that can be input are as follows.
g Single-byte numbers: 0 to 9
g Single-byte alphabets: A to Z, a to z
g Single-byte symbols: - . _ , + / ( )
f The signing request generated by the projector is PEM format (file extension: pem).
f Apply issuing of the server certificate to the certification organization using the saved signing request file (PEM format).
Installing the certificate
Install the server certificate and the intermediate certificate issued by the certification organization into the
projector.
1)
Click [Certificate] → [Server Certificate install] → [Browse].
f A dialog to select the file is displayed.
2)
Select the server certificate file and click [Open].
f If the intermediate certificate is issued from the certification organization together with the server certificate,
proceed to Step 3).
f If only the server certificate is issued from the certification organization, proceed to Step 5).
3)
Click [Browse] in [Intermediate Certificate install].
f A dialog to select the file is displayed.
4)
Select the intermediate certificate file and click [Open].
168 - ENGLISH
Chapter 5 Operations — Using the web control function
Enter the projector name or the IP address set in the projector.
Enter the country code defined in ISO 3166-1 alpha-2 (two upper case alphabets).
Enter the State, etc.
Enter the locality.
Enter the organization name.
Enter the organization unit name.
[RSA key size]
The key length of the current CRT key is displayed.
[Last modified]
The generation date and time of the current CRT key is displayed.
Details
Character length
limit
64 characters
―
128 characters
128 characters
64 characters
64 characters
―
―
Advertisement
Table of Contents
