Table of Contents
Advertisement
7)
Press as to select [STORE], and press the <ENTER> button.
f The confirmation screen is displayed.
8)
Press qw to select [OK], and press the <ENTER> button.
Note
f If [ON(2.X.X.X)] or [ON(10.X.X.X)] is selected, IP address is calculated and set automatically.
f The network setting is common for the <LAN> terminal and the <DIGITAL LINK/LAN> terminal.
[Art-Net CHANNEL SETTING]
Set the assignment of the channel.
For the channel definitions used for controlling the projector with the Art-Net function, refer to "Using Art-Net
function" ( x page 200).
1)
Press as to select [Art-Net].
2)
Press the <ENTER> button.
f The [Art-Net] screen is displayed.
3)
Press as to select [Art-Net CHANNEL SETTING].
4)
Press qw to switch the item.
[2]
[USER]
[1]
f Proceed to Step 6) when anything other than [USER] is selected. The function assigned to the channel is
displayed by pressing the <ENTER> button.
f Proceed to Step 5) when [USER] is selected.
5)
Press the <ENTER> button.
f The [CHANNEL SETUP] screen is displayed.
6)
Press as to select the channel to set, and press qw to switch the item.
[LIGHT OUTPUT]
[INPUT SELECT]
[POWER]
[SHUTTER]
[FADE-IN]
[FADE-OUT]
[GEOMETRY]
[CUSTOM MASKING]
[FREEZE]
[COLOR]
[TINT]
[RASTER PATTERN]
[AUDIO VOLUME]
[ENABLE / DISABLE]
[NONE]
f The setting can be also made by pressing as to select the channel, pressing the <ENTER> button to
display the item list, pressing asqw to select the item, and pressing the <ENTER> button.
f Same item cannot be set for multiple channels, except for [NONE].
[Art-Net STATUS]
Display the content of control assigned to each channel and the received data of that channel.
1)
Press as to select [Art-Net].
146 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
Uses the channel assignment in standard setting.
Changes the channel assignment.
Uses the channel assignment with DZ21K series compatible.
DZ21K series: DZ21K series, DS20K series, DW17K series, DZ16K series
Adjusts the amount of light.
Switches the input.
Controls the power status.
Controls the shutter function.
Sets the fade-in time.
Sets the fade-out time.
Performs geometric adjustment.
Performs geometric adjustment using a computer.
Freezes the projected image, and turns off the audio.
Adjusts the color saturation.
Adjusts the tint.
Displays the raster pattern.
Adjusts the volume.
Enables/disables the control of the projector with the Art-Net function.
No definition
Advertisement
Table of Contents
