Table of Contents
Advertisement
Chapter 3 Basic Operations — Switching on/off the projector
4)
Press the <ENTER> button to proceed to the initial setting.
Initial setting (time zone)
Set [TIME ZONE] in accordance with the country or region where you use the projector.
After completed the initial setting, you can change the setting from the [PROJECTOR SETUP] menu → [DATE
AND TIME]. The current settings are displayed in [LOCAL DATE] and [LOCAL TIME].
1)
Press qw to switch the setting.
2)
Press the <ENTER> button to proceed to the initial setting.
Note
f In the factory default setting, the time zone of the projector is set to +09:00 (Japan and Korea Standard Time). Change the setting of the
[PROJECTOR SETUP] menu → [DATE AND TIME] → [TIME ZONE] to the time zone of the region where you use the projector.
Initial setting (date and time)
Set the local date and time. After completed the initial setting, you can change the setting from the [PROJECTOR
SETUP] menu → [DATE AND TIME].
To set the date and time automatically, refer to "Setting the date and time automatically" ( x page 117).
1)
Press as to select an item.
2)
Press qw to switch the setting.
3)
Press the <ENTER> button.
f Confirm the setting value and complete the initial setting.
48 - ENGLISH
INITIAL SETTING
TIME ZONE
+09:00
20XX/01/01
LOCAL DATE
LOCAL TIME
12：34：56
Please set up a time zone according to
the area of your country or region.
CHANGE
SET
ENTER
INITIAL SETTING
YEAR
20XX
MONTH
1
DAY
1
HOUR
12
MINUTE
34
SECOND
56
Please set the date and time
of the built-in clock of the projector.
MENU SELECT
CHANGE
SET
ENTER
6/7
7/7
Advertisement
Table of Contents
