Sharpness / Gamma / Noise Reduction / Pulldown Mode - Panasonic PT-D7500U Operating Instructions Manual

Sharpness / Gamma / Noise reduction / Pulldown mode

Procedure of adjustment
MAIN MENU
PICTURE
POSITION
LANGUAGE
OPTION
TEST PATTERN
SIGNAL LIST
:MENU SELECT
ENTER:SUB MENU
PICTURE
PICTURE MODE
COLOR
TINT
COLOR TEMP.
GAMMA
CONTRAST
BRIGHT
SHARPNESS
NOISE REDUCTION
AI CONTROL
:MENU SELECT
:ADJUST
Adjustment items
Sharpness
Gamma selection
Noise reduction
Pulldown mode
Note • Noise reduction cannot be adjusted with analog RGB input, DVI input or network input.
• In pull-down mode, the image quality will be deteriorated (lowered vertical resolution) if "2:2 Forced
On" is selected for setting of others than a signal that has been pulled-down by 2:2.
STANDARD
50
30
STANDARD
STANDARD
32
32
6
2
OFF
Operation
Sharpens the outline of the image.
Switches the gamma modes
Switches the noise reduction effect mode.
Increase the vertical resolution when the
PAL (or SECAM) 576i signal input or the
NTSC 480i signal input is applied.
Press the "MENU" button.
The MAIN MENU screen will be displayed.
Select "PICTURE" with the
buttons.
Press the "ENTER" button.
The PICTURE screen will be displayed.
Select desired one of the items in the
following table with the
Note
• When and
above or under the items in the
"PICTURE" or "OPTION" screen, they
indicate that there are more adjustment
(items).
Switch the setting with the
buttons.
Refer to the following table for the items and the
details.
0 to 7 for the RGB system and the HD system
(factory setting is 2) 0 to 15 for the SD system
(factory setting is 6)
10 types including: Standard 1,Standard 2, Cinema,
User 1, User 2, 2.2, 2.5, Natural, Graphic 1, Graphic 2
(Factory setting :
RGB system : Graphic 1 for PT-D7600,
SD and HD systems : Standard 1)
Four types: OFF (no correction), 1 (low),
2 (middle), 3 (high) (factory default: 2)
OFF: Unforced cinema processing
AUTO: Performs automatic detection and
cinema processing. (factory default)
2:2 FORCED-ON: Forced cinema processing
buttons.
buttons are displayed
Adjustment
Graphic 2 for PT-D7500.
55