Table of Contents
Advertisement
Updating the firmware
The firmware of the projector can be updated via LAN or using a USB memory.
Check the website (https://panasonic.net/cns/projector/pass/) for availability of the firmware that can be updated.
Customer can update the firmware if a newer version than the current firmware version is published.
It is necessary to register and log in to PASS
download the firmware.
*1 PASS: Panasonic Professional Display and Projector Technical Support Website
For details, visit the website (https://panasonic.net/cns/projector/pass/).
r Firmware that can be updated
f Main version
r How to confirm the firmware version
Current firmware version can be confirmed by pressing the <STATUS> button on the remote control and displaying
the [STATUS] screen.
The firmware version can also be confirmed in the [PROJECTOR SETUP] menu → [STATUS].
Note
f A LAN cable is required to connect to the network via wired LAN.
Updating the firmware via LAN
Example of network connection
Attention
f When a LAN cable is directly connected to the projector, the network connection must be made indoors.
Note
f A LAN cable is required to connect to the network via wired LAN.
f Connect a LAN cable to the <LAN> terminal or the <DIGITAL LINK/LAN> terminal of the projector.
f To connect to the network using the <LAN> terminal, set the [NETWORK] menu → [ETHERNET TYPE] to [LAN] or [LAN & DIGITAL LINK].
Chapter 5 Operations — Updating the firmware
*1
to confirm the availability of the firmware that can be updated or to
STATUS
PROJECTOR TYPE
PT-FRQ50
SERIAL NUMBER
SN1234567
PROJECTOR RUNTIME
10h
LIGHT RUNTIME
CONTINUOUS LIGHTING TIME
MAIN/SUB VERSION
1.00 / 1.00
INTAKE AIR TEMP.
25°C/77°F
OPTICS MODULE TEMP.
29°C/84°F
EXHAUST AIR TEMP.
28°C/82°F
LIGHT TEMP. 1
34°C/93°F
LIGHT TEMP. 2
36°C/96°F
SELF TEST
NO ERRORS
E-MAIL/USB
ENTER
CHANGE
EXIT
MENU
Computer
LAN cable (straight)
Switching hub
1/4
2h
1h 23m
Main version
Projector
LAN cable (straight)
ENGLISH - 185
Advertisement
Table of Contents
