[Shutter Setting] - Panasonic PT-FRQ60WU7 Operating Instructions Manual

Table of Contents

Advertisement

3)
Press as to select [WHITE], [RED], [GREEN], or [BLUE].
4)
Press qw to adjust the level.
Item
Press w .
[VERTICAL]
Press q .
Press w .
[HORIZONTAL]
Press q .

[SHUTTER SETTING]

Set the operation of the shutter function.
Setting [FADE-IN] or [FADE-OUT]
1)
Press as to select [SHUTTER SETTING].
2)
Press the <ENTER> button.
f The [SHUTTER SETTING] screen is displayed.
3)
Press as to select [FADE-IN] or [FADE-OUT].
4)
Press qw to switch the item.
[FADE-IN]
[FADE-OUT]
Note
f If the <SHUTTER> button on the remote control is pressed during fade-in or fade-out, the fade operation is canceled.
f Fade-in/fade-out is not performed on the audio. Audio is output or paused linked to the operation of the shutter function.
Setting [STARTUP]
Automatically enable/disable the shutter function (shutter: closed/open) when the power is turned on.
1)
Press as to select [SHUTTER SETTING].
2)
Press the <ENTER> button.
f The [SHUTTER SETTING] screen is displayed.
3)
Press as to select [STARTUP].
4)
Press qw to switch the item.
[OPEN]
[CLOSE]
Using the shutter function
Image and audio are turned off when the projector is not used for a specific time.
1)
Press as to select [SHUTTER SETTING].
2)
Press the <ENTER> button.
f The [SHUTTER SETTING] screen is displayed.
3)
Press as to select [SHUTTER].
102 - ENGLISH
Chapter 4  Settings — [DISPLAY OPTION] menu
Operation
The lower-side color becomes pale, or the upper-side color
becomes dark.
The upper-side color becomes pale, or the lower-side color
becomes dark.
The left-side color becomes pale, or the right-side color
becomes dark.
The right-side color becomes pale, or the left-side color
becomes dark.
Item
[OFF]
[0.5s] - [10.0s]
The projector goes into projection mode with the shutter function disabled (shutter: opened) when the
power is turned on.
The projector goes into projection mode with the shutter function enabled (shutter: closed) when the
power is turned on.
Adjustment
Adjustment
Does not set fade-in or fade-out.
Sets the fade-in or fade-out time.
Select an item from [0.5s] - [4.0s], [5.0s], [7.0s], or [10.0s]. [0.5s] -
[4.0s] can be selected in increments of 0.5.
Range of adjustment
-127 - +127

Advertisement

Table of Contents
loading

Table of Contents