Table of Contents
Advertisement
f Use a torque screwdriver or Allen torque wrench to tighten the fixing screws to their specified tightening torques.
Do not use electric screwdrivers or impact screwdrivers.
(Screw diameter: M6, tapping depth inside the projector:15 mm (19/32"), torque: 4 ± 0.5 N·m)
Positions of screw holes for ceiling mount and
f Do not stack projectors on top of each other.
f Do not use the projector supporting it by the top.
f Do not block the intake and exhaust vents of the projector.
f Prevent hot and cool air from the air conditioning system to blow directly to the intake and exhaust vents of the
projector.
500 mm (19-11/16") or longer
500 mm (19-11/16") or longer
f Do not install the projector in a confined space.
When installing the projector in a confined space, provide air conditioning or ventilation separately. Exhaust heat
may accumulate when the ventilation is not enough, triggering the protection circuit of the projector.
f Panasonic Connect Co., Ltd. takes no responsibility for any damage to the product caused by an inappropriate
choice of location for installing the projector, even if the warranty period of the product has not expired.
Security
When using this product, take safety measures against the following incidents.
f Personal information being leaked via this product
Chapter 1 Preparation — Precautions for use
Adjustable feet
adjustable feet
500 mm (19-11/16") or longer
Screw holes for ceiling mount
(M6)
100 mm (3-15/16") or longer
ENGLISH - 21
Advertisement
Table of Contents
