[Art-Net] - Panasonic PT-FRQ60WU7 Operating Instructions Manual

[ON]
[OFF]
[PJLink NOTIFICATION]
Set to enable or disable the PJLink notification function.
1) Press as to select [PJLink].
2) Press the <ENTER> button.
f The [PJLink] screen is displayed.
3) Press as to select [PJLink NOTIFICATION].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
f If [ON] is selected, proceed to Step 5).
5) Press as to select [NOTIFIED IP ADDRESS 1] or [NOTIFIED IP ADDRESS 2].
f Enter the IP address of the computer to notify the status of the projector.

[Art-Net]

Set the Art-Net function.
Setting the password of the administrator account ( x page 140) is required for using the Art-Net function of the
projector.
Note
f If the password of the administrator account has not been set, that is, if it is left blank, the network function of this projector cannot be used.
Set a password before using the web control function or the communication control (including operation with application software) via LAN.
[Art-Net SETUP]
Make settings to use the Art-Net function.
1) Press as to select [Art-Net].
2) Press the <ENTER> button.
f The [Art-Net] screen is displayed.
3) Press as to select [Art-Net SETUP].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON(2.X.X.X)]
[ON(10.X.X.X)]
[ON(MANUAL)]
f Proceed to Step 5) when anything other than [OFF] is selected.
5) Press the <ENTER> button.
f The [Art-Net SETUP] screen is displayed.
6) Press as to select an item, and press qw to switch the setting.
[NET]
[SUB NET]
[UNIVERSE]
[START ADDRESS]
Chapter 4 Settings — [NETWORK] menu
Enables PJLink protocol control function.
Disables PJLink protocol control function.
Disables the PJLink notification function.
Enables the PJLink notification function.
Disables the Art-Net function.
Enables the Art-Net function and sets the IP address to 2.X.X.X.
Enables the Art-Net function and sets the IP address to 10.X.X.X.
Enables the Art-Net function and uses the IP address set in [WIRED LAN].
Enter [NET] to be used when the projector processes Art-Net.
Enter [SUB NET] to be used when the projector processes Art-Net.
Enter [UNIVERSE] to be used when the projector processes Art-Net.
Enter [START ADDRESS] to be used when the projector processes Art-Net.
ENGLISH - 145