Table of Contents
Advertisement
3)
Press as to select [SCREEN FORMAT].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[16:9]
[16:10]
[4:3]
f Proceed to Step 5) when [4:3] or [16:10] is selected.
5)
Press as to select [SCREEN POSITION].
6)
Press qw to adjust [SCREEN POSITION].
Note
f [SCREEN POSITION] cannot be selected or adjusted when [SCREEN FORMAT] is set to [16:9].
[AUTO SIGNAL]
Set whether to execute automatic setup of signals automatically.
The screen display position or signal level can be adjusted automatically without pressing the <AUTO SETUP>
button on the remote control on each occasion if you input unregistered signals frequently at meetings, etc.
1)
Press as to select [AUTO SIGNAL].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
[AUTO SETUP]
Set this when adjusting a special signal or horizontally long (such as 16:9) signal.
Setting with [MODE]
1)
Press as to select [AUTO SETUP].
2)
Press the <ENTER> button.
f The [AUTO SETUP] screen is displayed.
3)
Press as to select [MODE].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[DEFAULT]
[WIDE]
[USER]
f Proceed to Step 7) when [DEFAULT] or [WIDE] is selected.
f Proceed to Step 5) when [USER] is selected.
5)
Press as to select [DISPLAY DOTS], and press qw to match [DISPLAY DOTS] to the horizontal
resolution of the signal source.
6)
Press as to select [MODE].
7)
Press the <ENTER> button.
f Automatic adjustment is executed. [PROGRESS] is displayed while in automatic adjustment. When
completed, the screen returns to the [AUTO SETUP] screen.
92 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Sets the screen format to 16:9.
Sets the screen format to 16:10.
Sets the screen format to 4:3.
Sets the auto signal function to off.
Executes automatic setup automatically when images are changed to unregistered signals during
projection.
Standard setting.
Select this item when an image aspect ratio is a wide-screen signal, which does not meet the
[DEFAULT] setting.
Select this when receiving a signal with a special horizontal resolution (number of display dots).
Advertisement
Table of Contents
