Table of Contents
Advertisement
Set according to the following steps to reproduce more faithful, sRGB compliant colors.
1)
Set [COLOR MATCHING] to [OFF].
f Refer to [COLOR MATCHING] ( x page 90).
2)
Display the [PICTURE] menu.
f Refer to "[PICTURE] menu" ( x page 68).
3)
Press as to select [PICTURE MODE].
4)
Press qw to set [REC709].
5)
Press as to select [GAMMA].
6)
Press qw or the <ENTER> button.
f The [GAMMA] individual adjustment screen is displayed.
7)
Press qw to select [2.2].
8)
Press as to select [COLOR].
9)
Press the <DEFAULT> button on the remote control to set the factory default setting.
10) Follow Steps 8) to 9) to set [TINT], [COLOR TEMPERATURE], [WHITE GAIN], and [DAYLIGHT VIEW] to
the factory default settings.
Note
f sRGB is available for RGB signal input only.
Chapter 4 Settings — [PICTURE] menu
ENGLISH - 75
Advertisement
Table of Contents
