Table of Contents
Advertisement
Updating the firmware
The firmware of the projector can be updated via LAN.
Check the website (https://panasonic.net/cns/projector/pass/) for availability of the firmware that can be updated.
Customer can update the firmware if a newer version than the current firmware version is published.
It is necessary to register and log in to PASS
download the firmware.
*1 PASS: Panasonic Professional Display and Projector Technical Support Website
For details, visit the website (https://panasonic.net/cns/projector/pass/).
r Firmware that can be updated
f Main version
f Sub version
r How to confirm the firmware version
Current firmware version can be confirmed by pressing the <状态> button on the remote control and displaying
the [STATUS] screen.
The firmware version can also be confirmed in the [PROJECTOR SETUP] menu → [STATUS].
Note
f A LAN cable is required to connect to the network via wired LAN.
Updating the firmware via LAN
Example of general network connection
Computer
Attention
f When a LAN cable is directly connected to the projector, the network connection must be made indoors.
Note
f A LAN cable is required to connect to the network via wired LAN.
f Connect a LAN cable to the <局域网> terminal or the <DIGITAL LINK> terminal of the projector.
f To connect to the network using the <局域网> terminal, set the [NETWORK] menu → [NETWORK CONTROL] → [TYPE SELECT] to [LAN]
or [LAN & DIGITAL LINK].
190 - ENGLISH
Chapter 5 Operations — Updating the firmware
to confirm the availability of the firmware that can be updated or to
*1
STATUS
PROJECTOR TYPE
SERIAL NUMBER
PROJECTOR RUNTIME
LIGHT RUNTIME
10000h / 10000h
CONTINUOUS LIGHTING TIME
MAIN/SUB VERSION
INTAKE AIR TEMP.
31°C/87°F
EXHAUST AIR TEMP.
31°C/87°F
31°C/87°F
LIGHT1 TEMP.
31°C/87°F
LIGHT2 TEMP.
SELF TEST
SEND E-MAIL
执行
CHANGE
菜单
LAN cable (straight)
LAN cable (straight)
Hub
1/5
PT-SMZ16KC
123456789012
10000h
1h 23m
Main version
1.00 / 1.00
Sub version
NO ERRORS
EXIT
Projector
Advertisement
Table of Contents
