Table of Contents
Advertisement
DIGITAL LINK
"DIGITAL LINK" is a technology to transmit the video, audio, Ethernet, and serial control signals using a twisted
pair cable by adding unique functions by Panasonic Connect Co., Ltd. to the HDBaseT
formulated by HDBaseT Alliance.
This projector supports the optional DIGITAL LINK output supported device (Model No.: ET-YFB100C) and
peripheral devices by other manufacturers (twisted-pair-cable transmitters such as the "XTP transmitter" of
Extron Electronics) that use the same HDBaseT
operation has been verified with this projector, visit the website (https://panasonic.net/cns/projector/). Note that
the verification for devices of other manufacturers has been made for the items set by Panasonic Connect Co.,
Ltd., and not all the operations have been verified. For operation or performance problems caused by the devices
of other manufacturers, contact the respective manufacturers. This projector does not support audio transmission
because it is not equipped with audio function.
Art-Net
"Art-Net" is an Ethernet communication protocol based on the TCP/IP protocol.
By using the DMX controller and the application software, illumination and stage system can be controlled. Art-Net
is made based on DMX512 communication protocol.
Application software supported by the projector
The projector supports following application software.
f Logo Transfer Software
This application software transfers the original image, such as company logo, which is projected at the start, to
the projector.
For downloading application software, visit the website (https://prosystem.panasonic.cn/ProjectorDownload).
f Smart Projector Control
This application software sets and adjusts the projector connected via LAN using a smartphone or a tablet.
For details or downloading application software, visit the website (https://panasonic.net/cns/projector/).
f Multi Monitoring & Control Software
This application software monitors and controls the multiple display devices (projector and flat panel display)
connected to an intranet.
For downloading application software, visit the website (https://prosystem.panasonic.cn/ProjectorDownload).
f Early Warning Software
This plug-in software monitors the status of the display devices and their peripherals within an intranet, and
notifies of abnormality of such equipment and detects the signs of possible abnormality. "Early Warning
Software" is preinstalled in the "Multi Monitoring & Control Software". To use the early warning function of
this plug-in software, install "Multi Monitoring & Control Software" in the PC to be used. By enabling the early
warning function, it will notify of the approximate time to replace the consumables for the display devices,
to clean each part of the display devices, and to replace the components of the display devices, allowing to
execute maintenance in advance.
The early warning function can be used by registering maximum of 2048 display devices free of charge for
90 days after installing the "Multi Monitoring & Control Software" into a PC. To continuously use after the 90
days, it is necessary to purchase the license of "Early Warning Software" (ET-SWA100 Series) and perform
the activation. Also, depending on the type of license, the number of display devices that can be registered for
monitoring varies. For details, refer to the Operating Instructions of "Multi Monitoring & Control Software".
Storing
To store the projector, store in a dry room.
Disposal
To dispose of the product, ask your local authorities or dealer for correct methods of disposal. Also, dispose of the
product without disassembling.
Chapter 1 Preparation — Precautions for use
standard. For the devices of other manufacturers that the
TM
communication standard
TM
ENGLISH - 19
Advertisement
Table of Contents
