Table of Contents
Advertisement
Item
[VERTICAL]
[HORIZONTAL]
Setting [FLEXIBLE CORRECTION]
Correct the topical brightness unevenness and color unevenness using the correction value in the projector.
1)
Press as to select [UNIFORMITY].
2)
Press the <执行> button.
f The [UNIFORMITY] screen is displayed.
3)
Press as to select [FLEXIBLE CORRECTION].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[GEOMETRY UNLINKED]
[OFF]
[GEOMETRY LINKED]
f Proceed to Step 5) when anything other than [OFF] is selected.
5)
Press as to select [MODE].
6)
Press qw to switch the item.
f The items will switch each time you press the button.
[CHROMA ONLY]
[LUMINANCE/CHROMA]
Note
f When [GEOMETRY LINKED] is selected, set the projection method and perform geometric adjustment, and then correct the uniformity.
f The correction value in the projector can be changed using the "Geometric & Setup Management Software".
"Geometric & Setup Management Software" can be downloaded from the website (https://panasonic.net/cns/projector/pass/). It is necessary
to register and login to PASS to download.
[SHUTTER SETTING]
The operation of the shutter function is set.
Setting [MECHANICAL SHUTTER]
1)
Press as to select [SHUTTER SETTING].
2)
Press the <执行> button.
f The [SHUTTER SETTING] screen is displayed.
156 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Operation
Press w.
Press q.
Press w.
Press q.
Corrects the brightness unevenness and color unevenness using the correction value in the projector.
The shape of the projected image and the compensation area of uniformity are not linked.
Select this item to correct the brightness unevenness and the color unevenness of the light irradiated
from the projection lens.
Does not perform correction using the correction value in the projector. Select this item to prioritize
the brightness of the whole projected image.
Corrects the brightness unevenness and color unevenness using the correction value in the
projector. When the geometric adjustment is performed, the shape of the projected image and the
compensation area of uniformity are linked.
Select this item when projecting at an angle against the flat screen, or when projecting on a curved
screen.
Corrects only the color unevenness. Select this item to prioritize the brightness of the whole projected
image.
Corrects the brightness unevenness and the color unevenness.
Adjustment
The lower-side color becomes
pale, or the upper-side color
becomes dark.
The upper-side color becomes
pale, or the lower-side color
becomes dark.
The left-side color becomes pale,
or the right-side color becomes
dark.
The right-side color becomes
pale, or the left-side color
becomes dark.
Range of adjustment
-127 - +127
Advertisement
Table of Contents
