Table of Contents
Advertisement
(4)
Type of check digit
Where no check digit is attached, the bar code of the data row will be drawn.
In the case of the check digit check, if each check digit checked according to
the type of bar code is normal, the bar code will be drawn. If the check digit not
meeting the requirement is designated, the bar code will not be drawn.
In the case of the check digit auto attachment, each check digit is attached
according to the type of bar code and the bar code is drawn.
If the type of bar code is CODE93, CODE128 (with auto code selection), or
UCC/EAN128, the check digit will always be attached regardless of the
designation of the type of check digit.
If the type of bar code is JAN, EAN, or UPC, the designation of no check digit
attachment automatically assume the check digit check.
DBP Modulus 10 is Modulus 10 for Deutsche Bundespost Postdienst only.
(5)
Bar width, space width, and character-to-character space
Designate the bar, space, and character-to-character space widths according to
the type of bar code. Note that the designated proper value differs according to
the rotational angle of bar code, type, number of digits, print speed, paper and
ribbon used, etc. Examples of such designation are listed below. (1 dot = 1/12
mm)
In case of JAN, EAN, UPC, CODE93, CODE128, UCC/EAN128, PDF417, or
MicroPDF417, 2 to 6-module width is calculated automatically when 1-module
width is designated.
Type of bar code
1 module 2 modules 3 modules 4 modules 5 modules 6 modules
Bar Space Bar Space Bar Space Bar Space Bar Space Bar Space
JAN, EAN, UPC
CODE93
CODE128, EAN128
PDF417
MicroPDF417
Type of bar code
MSI
ITF
CODE39
NW7
Industrial 2 of 5
In the case of Data Matrix or CP code
When NW7 is used, transmission of the space character assumes the space of (narrow
space ×12) dots. In this case, the space is max. 255 dots.
4
8
3
6
3
6
3
6
2
4
Narrow
Wide
Bar Space Bar Space
3
3
8
8
3
3
8
8
3
3
8
8
3
3
8
8
3
3
8
0
1-cell width
1-cell width = 4
- 80 -
12
16
9
12
9
12
9
12
6
8
Character-to-character
0
0
3
3
3
When 1-cell width is 00 for the Data Matrix
or CP code, a two-dimensional code is not
drawn. However, the two-dimensional code
printed on the previous label is cleared.
-
-
-
-
-
-
15
18
10
12
Advertisement
Table of Contents
