Table of Contents
Advertisement
TAA-0175
Modified
Date
Page
93/2/15
-
93/3/31
6
7
22
27
28~29,
32, 35, 42,
51, 81
48~49
50
53
57, 58, 62 The number of bar/space width digits of the command example has been changed
59
83
84
88
115
117
118~119
MODIFICATION HISTORY
EXTERNAL EQUIPMENT INTERFACE SPECIFICATION
Newly published.
The connector has been changed (the connector actually used is described).
57L-40360-27CB → 57RE-40360-73B
57-40360-1 → 57E-30360
The shape of the connector pins has been changed (from round pins to square
pins).
The programmable range table has been changed.
• The unit of the print density fine adjust command has been added.
• Misprint has been corrected (back feed length → print density).
• Fine adjust value "00" has been added.
The effective print area table has been changed.
1-4 module width (3-digit bar/space) designation has been changed to 2-digit 1-
module designation (to simplify designation method).
* The parameter symbols have been changed.
The number of bar/space width digits has been changed from 3 to 2.
* The parameter symbols have been changed.
The explanation about the module width has been added.
from 3 to 2.
The misprint has been corrected ("," to ";").
• The maximum storable command capacity per kind has been added.
• The saved data call command and the bit map writable character program
command have been added to the commands which are not saved.
The error types at saved data calling have been added.
The cause of the command error has been added.
Two types of MSI check digit (which are not included in the specification) have been
deleted.
The maximum number of CODE39 digits has been changed.
• The maximum number of NW7 digits has been changed.
• The minimum number of CODE128 (without automatic selection) digits has been
changed.
Description
< 1 >
Advertisement
Table of Contents
