TEC B-372-QP Manual page 158

6.22 GRAPHIC COMMAND
Function Draw graphic data.
Format [ESC] SG; aaaa, bbbb, cccc, dddd, e, fff --- fff [LF] [NUL]
Term aaaa
bbbb
cccc
dddd
e
fff --- fff
: Print origin of X coordinate for drawing graphic data
Fixed as 4 digits (in 0.1 mm units)
: Print origin of Y coordinate for drawing graphic data
Fixed as 4 digits (in 0.1 mm units)
: No. of graphic width dots
Fixed as 4 digits (in dots)
However, when the graphic data "2: BMP file" is selected, this
designation is ignored.
contained in the graphic data.)
: No of graphic height dots
Fixed as 4 digits (in dots)
However, when the graphic data "2: BMP file" is selected, this
designation is ignored. (The information of the graphic height is
contained in the graphic data.)
• TOPIX compression mode
Resolution of graphic data:
0150: 150 DPI (The data is drawn in double resolution.)
0300: 300 DPI (The data is drawn in single resolution.)
: Type of graphic data
0: Nibble mode (4 dots/byte)
1: Hex. mode (8 dots/byte)
2: BMP file mode
3: TOPIX compression mode
4: Nibble mode (4 dots/byte)
5: Hex. mode (8 dots/byte)
: Graphic data
- 140 -
[ESC] SG
(The information of the graphic width is
*only two types
Overwrite drawing
Overwrite drawing
OR drawing
OR drawing