Feed Command - TEC B-372-QP Manual

6.17 FEED COMMAND

Function Feed the paper.
Format [ESC] Tabcde [LF] [NUL]
Term a
b
c
d
e
Explanation (1)
: Type of sensor
0: No sensor
1: Reflective sensor
2: Transmissive sensor (when using normal labels)
3: Transmissive sensor (when using preprinted labels)
4: Reflective sensor (when using a manual threshold value)
: Selects cut or non-cut
0: Non-cut
1: Cut
: Feed mode
C: Batch mode (cut issue, stop and cut, with back feed)
D: Strip mode (with back feed)
: Feed speed
1 to 9, A
[B-372/572]
3: 3"/sec.
5: 5"/sec.
8: 8"/sec.
[B-872/672]
3: 3"/sec.
4: 4"/sec.
8: 8"/sec.
: With/without ribbon
0: Without ribbon
1: With ribbon (with ribbon saving function)
2: With ribbon (without ribbon saving function)
* With ribbon, transmissive/non-transmissive conforms to the system
mode.
The B-672 does not contain the ribbon saving function.
This function cannot be selected.
* When the stacker is used, the ribbon saving function cannot be
designated.
Type of sensor


No sensor:
Feeding takes place according to the parameter designated by the Label Size
Set Command.

Reflective sensor:
Feeding takes place according to the parameter designated by the Label Size
Set Command. However, the black mark provided on the back side of the tag
paper is automatically sensed by the reflective sensor and the stop position is
finely adjusted.
- 126 -
[ESC] T