TEC B-372-QP Manual page 129

(12) MaxiCode data
For mode 2 or 3:
[ESC] RBaa; bbbbbbbbbcccdddeeeee --- eeeee [LF] [NUL]
For mode 4 or 6:
[ESC] RBaa; fffffffffggggg --- ggggg [LF] [NUL]


bbbbbbbbb
• Mode 2:
b1b2b3b4b5
b6b7b8b9
• Mode 3:
b1b2b3b4b5b6 : Zip code
b7b8b9

ccc

ddd

eee --- eee

fffffffff

ggg --- ggg
NOTES: 1. When other than numerics is included in the data string of zip code
(mode 2), zip code extension, class of service or country code, a
MaxiCode is not drawn.
2. If the message data is less than 84 digits when mode 2 or 3 is selected,
the printer adds a CR (000000) at the end of the data, and the remaining
digits will be padded with FSs (011100). When message data exceeding
84 digits is received, the excess data will be discarded before drawing a
MaxiCode.
3. If the message data is less than 93 digits (9 digits + 84 digits) when mode
4 or 6 is selected, the printer adds a CR (000000) at the end of the data,
and the remaining digits will be padded with FSs (011100).
message data exceeding 93 digits is received, the excess data will be
discarded before drawing a MaxiCode.
4. Mode 6 should not be used for usual operation since it is used for
scanner programming.
: Postal code Fixed as 9 digits
: Zip code
: Zip code extension
: Vacant
: Class of service
: Country code
: Message data strings
: Primary message data strings
: Secondary message data strings 84 digits
- 111 -
Fixed as 5 digits (Numerics)
Fixed as 4 digits (Numerics)
Fixed as 6 digits (Character "A" of
code set)
Fixed as 3 digits (20H)
Fixed as 3 digits (Numerics)
Fixed as 3 digits (Numerics)
84 digits
9 digits
When