TEC B-372-QP Manual page 142

(8) Status response
When the option with status response has been selected, a status response is
made at the end of printing or if an error occurs.
In batch mode and cut mode, the print end status response is made after printing
on the designated number of labels.
In strip mode, the status response is made after printing one label.
* Do not change the parameter for status response/no status response during
Examples
41.0
mm
73.2
mm
15.0 mm
10 PRINT #1, ESC$; "D0762, 0820, 0732"; LF$; NUL$;
20 PRINT #1, ESC$; "T11C52"; LF$; NUL$;
30 PRINT #1, ESC$; "C"; LF$; NUL$;
40 PRINT #1, ESC$; "PC001; 0150, 0410, 1, 1, A, 00, B"; LF$; NUL$;
50 PRINT #1, ESC$; "RC001; Sample"; LF$; NUL$;
60 PRINT #1, ESC$; "XS; I, 0004, 0011C5201"; LF$; NUL$;
printing, the status response may not be performed properly.
S a m p l e
82.0 mm
Paper feed direction
• Issue count:
• Cut interval:
• Paper:
76.2
• Issue mode:
mm
• Issue speed:
• Ribbon:
• Status response: With
- 124 -
4 pieces
1 piece
Tag paper (Reflective
sensor used)
Cut issue
5"/sec.
With