TEC B-372-QP Manual page 163

Note (1)
(2)
(3)
(4)
(5)
[Effective print area]
Item
Effective print width
Label Max.
Effective
print
length
Tag Max.
The print origin of coordinates must be set so that result of drawing the graphic data
will be within the effective print area set by the Label Size Set Command ([ESC] D).
The number of graphic width dots and number of graphic height dots must also be
set so that the result of drawing the graphic data will be within the effective print
area set by the Label Size Set Command ([ESC] D) in the same manner as above.
Both width and height are 12 dots/mm.
The actual result of drawing may deviate within ±0.33 mm in the X direction with
respect to the designated print origin of X coordinate.
To draw the received graphic data at high speed, the data is directly
developed into the image buffer without applying correction to each bit
with respect to the designated X coordinate. Consequently, an error of
up to 4 bits occurs.
The graphic data overwrites the image buffer.
Model B-372
Method Strip
Batch
Min.
Max. 80.0
Min. 6.0 21.4 23.0
W/o expansion
256.0
memory
W/expansion
995.0
memory
Min. 8.0
W/o expansion
256.0
memory
W/expansion
memory
B-572
Cut Strip Cut
Batch
128.0
6.0 21.4 23.0
298.6
995.0
991.0 991.0
23.4 8.0 23.4
298.6
997.0
- 145 -
B-872
Strip Cut
Batch Batch
10.0
213.3
5.5 20.9 23.0 5.5
320.0
661.3
8.0 23.4 8.0
320.0
661.3
[mm]
B-672
Strip Cut
170.6
20.9 23.0
298.6
981.3
23.4
298.6
981.3