TEC B-372-QP Manual page 64

[Format Command]
[ESC] PC01; ................... ; 01 [LF] [NUL]
[ESC] PC02; ................... ; 03 [LF] [NUL]
[ESC] PC03; ................... ; 04 [LF] [NUL]
[ESC] XB01; ................... ; 03, 04 [LF] [NUL]
[ESC] PC04; ................... ; 02 [LF] [NUL]
[ESC] PC05; ................... ; 03 [LF] [NUL]
[ESC] PC06; ................... ; 04 [LF] [NUL]
[ESC] XB02; ................... ; 03, 04 [LF] [NUL]
[Data Command]
[ESC] RC; A [LF] B [LF] ABCD [LF] 001 [LF] [NUL]
ABCD
001
Notes (1) The check digit attach, increment/decrement, and zero suppress processes are
performed according to the following priority. If any of the conditions is improper,
no drawing will take place.
For example, the zero(s) is replaced by a space(s) as a result of zero
suppression but the modulus 10 designated to be attached cannot be
calculated.
Increment/decrement > zero suppression > attachment of check digit
(2) Up to 32 fields for which incrementing/decrementing has been designated can be
drawn. If a total of bit map font, outline font or bar code increment/decrement
fields exceeds 32, drawing will take place without incrementing/decrementing any
excessive field. The field to be incremented or decremented is incremented or
decremented until the Image Buffer Clear Command ([ESC] C) is transmitted.
Link field No. 3
Link field No. 2
Link field No. 1
A
*ABCD001*
- 48 -
: Link field No. 1 is designated.
: Link field No. 3 is designated.
: Link field No. 4 is designated.
: Link fields No. 3 and No. 4 are
designated.
: Link field No. 2 is designated.
: Link field No. 3 is designated.
: Link field No. 4 is designated.
: Link fields No. 3 and No. 4 are
designated.
Designating link field No.
Link field No. 4
B
ABCD
001
*ABCD001*