TEC B-372-QP Manual page 85

. h
Ciiijjj
Jkkllmmmnnn : Connection setting (No connection when this parameter is omitted.)
ooo ------ ooo : Data string to be printed (omissible)
pp
: Rotational angle of bar code
0 : 0°
1 : 90°
2 : 180°
3 : 270°
: No. of cells (When this parameter is omitted, it is automatically set.)
..... It can be set in a version applicable to ECC200.
iii .. : No. of cells in X direction
jjj.. : No. of cells in Y direction
* Cell setting varies according to the ECC type.
No. of cells to be
designated
Min./Max. No. of cells
Rectangular code
• When this parameter is omitted, the number of cells is automatically
set. Also, when data except for the above values is designated in X
and Y directions, the number of cells is automatically set.
...... It can be set in the version applicable to ECC200, or when
ECC200 is selected.
kk
ll
mmm : ID number 1
nnn
Max. 2000 digits.
, pp , pp , ------, pp : Link field No. (omissible)
1 2 3 20
000 to 144
000 to 144
ECC0 to ECC140
Odd numbers only
9 × 9 to 49 × 49
: Code number
: No. of divided codes 01 to 16
: ID number 2
01 to 99 (1 to 99 can also be used.)
Up to 20 fields can be designated using commas.
- 69 -
Even numbers only
10 × 10 to 144 × 144
None
01 to 16
001 to 254
001 to 254
ECC200
18 × 8
32 × 8
26 × 12
36 × 12
36 × 16
48 × 16