TEC B-372-QP Manual page 136

[Batch mode (cut interval 1, 2 labels to be issued)]
• When DIP SW1-5 is turned on (with the automatic forward feed standby):
Cut position
A
B
[Batch mode (cut interval 1, 2 labels to be issued) During forward feed standby]
• When DIP SW1-5 is turned on (with the automatic forward feed standby):
A
B
Head position
A
A
B
B
Cut position Head position
A
A
B
B
- 118 -
(1) Idling
(2) End of printing 1st label (A)
(3) Feed to cut position.
(4) End of cutting 1st label (A)
(5) Feed back to home position.
(6) End of printing 2nd label (B)
(7) Feed to cut position
(8) End of cutting 2nd label (B)
(9) Feed back to home position.
(10) 10-mm automatic forward feed
after 3 seconds
(1) Idling (forward feed standby)
(2) Reverse feed to home position
(3) End of printing 1st label (A)
(4) Feed to cut position.
(5) End of cutting 1st label (A)
(6) Feed back to home position.
(7) End of printing 2nd label (B)
(8) Feed to cut position
(9) End of cutting 2nd label (B)
(10) Feed back to home position.
(11) 10-mm automatic forward feed
after 3 seconds