TEC B-372-QP Manual page 11

Modified
Date
Page
96/4/16 63-1, 64,
64-1, 69,
71
63-1, 69,
71
67-1
70
128-2 to
128-5
97/2/15 Cover, 1
11
12, 13, 20,
27-1
27-1~86
14
20
22
22-1
23
23-1
29, 32, 35,
42, 51, 81
38, 45, 56,
56-1,
58-3~58-9 The QR code has been added. Therefore, the explanation of the command has
63, 68,
88-1, 90
63, 65-1,
68, 69-1
63, 66-1
65-1, 69-1 • The description that the max. speed in strip mode on the B-672 is 4"/sec has
79
82-1~82-3 The explanation of TOPIX compression mode in the graphic command has been
The explanation about the automatic forward feed standby has been added.
<< One page added >>
The explanation about treating the label having width of 38 mm or less has been
added.
The explanation about setting the value to feed to the stop position has been added.
<< One page added >>
The notes to stop at the home position has been added.
Special characters other than JIS codes have been added (2220H to 287FH).
These models have been added. (B-672-QQ and B-672-QP)
• The cutting operation (DIP SW 1-6) has been added.
• The note "DIP SW. 1 does not contain the auto ribbon saving function" has been
added as Note 4.
• The B-672 has been added to Notes 2 and 3.
The ribbon motor drive voltage fine adjust command has been added.
According to the addition of the above command, the section number has been
changed.
The B-672 has been added in the table of NOTE 1 .
The QR code data command has been added.
The B-672 has been added in the table.
The B-672 has been added in Remark 1.
The B-672 has been added in Note 10.
The B-672 has been added in Example (3).
The B-672 has been added in the effective print area table.
The explanation of alphabets and numerals for increment/decrement has been
added.
also been added.
The B-672 has been added.
The explanation that the B-672 does not contain the ribbon saving function has
been added.
Mirror printing has been added.
been added.
• The B-672 has been added in the table of the issue speed.
• The explanation of the BMP file has been added.
• The explanation of the OR drawing has been added.
added.
Description
< 10 >