TEC B-372-QP Manual page 4

Modified
Date
Page
93/12/13 Cover, 22,
29, 32, 35,
42, 51
3
9
11
12
13
14
15
16
19
20
22
23
24
25
25-1
26
26-1
28
33
36, 43, 52 The print samples have been changed to the actual printing.
40, 47
47
50
53
54
The model names have been changed.
• XOFF output at power off has been added.
• XON output has been added.
The maximum current has been changed from 100 mA to 500 mA.
• The DIP SW1-2, 3, 4 have been changed (no message displayed → English).
• Use of the built-in rewinder has been added to DIP SW1-6.
• The XON/XOFF output function at power on/off has been changed in DIP SW2-7,
8 transmission control system.
The strip position fine adjustment has been added.
• The strip position fine adjustment has been added.
• The label gap has been changed to the effective print length, and initial value for it
has been changed from 2 mm to 74.2 mm.
• The label width has been changed to the effective print width.
The reset function has been added.
Note (5) has been added.
Note (6) has been added.
The explanation of the reset command has been added to precautions.
The message display command has been added.
• The range of tag pitch "A" has been changed.
• The note about the effective print width has been added.
• The explanation for the print stop position in strip mode has been added.
• The note for the ribbon save issue has been added.
The strip position fine adjustment has been added.
The figure explaining the feed length fine adjustment has been modified.
The strip position fine adjustment has been added.
• The limit for the feed length fine adjustment has been added.
• Note (5) has been added.
• The example for the strip issue has been added.
<< One page added >>
The notes for the designated coordinates have been added.
The character magnifications have been changed.
The note for the character string number has been added.
The note for the outline font which cannot be printed properly has been added.
• The format has been changed.
• The character-to-character space designation at MSI and ITF has been added.
• The notes for the bar width, space width and character-to-character space have
been added.
• The explanation for the space width for NW7 has been added.
The explanation for the bar code height of 0000 has been added.
Description
< 3 >