TEC B-372-QP Manual page 73

[The following applies to the B-372-QP (V2.4 or after), B-572-QP/QQ (V2.4 or after),
B-872-QP/QQ (V1.3 or after) and B-672-QP/QQ.]
Alphabets and numerals for increment/decrement
For the data string, up to 40 digits (including alphabets, numerals and symbols) are
possible.
Example of increment/decrement calculation
Initial value
INC/DEC
1st label
2nd label
3rd label
4th label
5th label
(10) Zero suppression
No. of zeros to be suppressed
Data
Print
The leading zero(s) in a data row is replaced by a space(s) according to the designated
number of digits. However, if the number of digits to be suppressed is greater than the
data row, the data row will be drawn without zero suppression. Where the data row
exceeds the maximum number of digits (40), the data row will not be drawn.
When the type of font is C, zero suppress designation cannot be performed. (Even if
designation is performed, the printer operates assuming no designation has been
performed.)
(11) Data string to be printed
Drawing data can be programmed by designating the number of digits after the symbol
"=." Up to 255 digits can be printed. However, when the type of font is C, up to 127 digits
can be printed. When the number of digits exceeds the maximum value, exceeding data
will be discarded.
For the character code table, refer to the character code table mentioned later.
(12) Link field No.
The link field No. can be programmed by designating it after the symbol ";." After the link
field No. is designated using the Format Command, the data strings are linked by the Link
Field Data Command to draw an image.
Up to 20 fields can be linked.
The following shows an example of linked fields on the two continuous labels.
00000 A0A0A
+1 +1
00000 A0A0A
00001 A0A1A
00002 A0A2A
00003 A0A3A
00004 A0A4A
0 1
0000 0000 0000
0000 0
- 57 -
7A8/9 A2A0A
+3
7A8/9 A2A0A
7A9/2 A1A7A
7A9/5 A1A4A
7A9/8 A1A1A
8A0/1 A0A8A
2 2 3
0A12 0123
00 A12 123
-3
4 5
0123 0123
0123 0123