TEC B-372-QP Manual page 72

(8) Check digit to be attached
When Modulus 10 or Modulus 43 is selected, the check digit of a data row is calculated
and attached to the data row for drawing. When modulus 10 is designated and the data
includes any data other than the numerals the data row will not be drawn. When modulus
43 is designated and the data includes any character other than CODE39, no drawing will
take place.
When DBP Modulus 10 is selected, the check digit of a data row is calculated and only
the check digit is drawn. When the data includes any data other than the numerals,
however, drawing is not performed.
When the type of font is C, the check digit attach designation is not possible. (Even if
designation is performed, the printer operates assuming no designation has been
performed.)
* DBP Modulus 10 is Modulus 10 for Deutsche Bundespost Postdienst only.
(9) Increment/decrement
Printing is performed while the data is incremented or decremented each time a label is
issued.
[The following applies to the B-372-QP (up to V2.3), B-572-QP/QQ (up to V2.3) and B-
872-QP/QQ (up to V1.2).]
Where the data row includes any data other than numerals, the data row will not be drawn.
Where the data row exceeds the maximum number of digits (40), the data row will not be
drawn, either.
When the font is C, increment/decrement designation cannot be performed.
(Even if designation is performed, the printer operates assuming no designation has been
performed.)
Initial value
INC/DEC
Zero suppression
designated
1st label
2nd label
3rd label
4th label
5th label
0000 0000
+10 +10
Not
5
0000 0000
0010 0010
0020 0020
0030 0030
0040 0040
- 56 -
0000 0000
+10 +10
3 0
000 0000
010 0010
020 0020
030 0030
040 0040
999999
+1
3
999999
000
001
002
003