Issue Command - TEC B-372-QP Manual

6.16 ISSUE COMMAND

Function Issue labels according to the print conditions programmed.
Format [ESC] XS; I, aaaa, bbbcdefgh [LF] [NUL]
Term aaaa
bbb
c
d
e
f
g
h
: Number of labels to be issued
0001 to 9999
: Cut interval. Designates the number of pieces to be printed before the
backing paper is cut.
000 to 100 (no cut when 000)
: Type of sensor
0: No sensor
1: Reflective sensor
2: Transmissive sensor (when using normal labels)
3: Transmissive sensor (when using preprinted labels)
4: Reflective sensor (when using a manual threshold value)
: Issue mode
C: Batch mode (cut issue, stop and cut, with back feed)
D: Strip mode (with back feed)
: Issue speed
1 to 9, A
[B-372/572]
3: 3"/sec.
4: 5"/sec.
8: 8"/sec.
[B-872/672]
3: 3"/sec.
4: 4"/sec.
8: 8"/sec.
: With/without ribbon
0: Without ribbon
1: With ribbon (with ribbon saving function)
2: With ribbon (without ribbon saving function)
* With ribbon, transmissive/non-transmissive conforms to the system
mode.
The B-672 does not contain the ribbon saving function. If the ribbon
saving function is selected, this function does not work (this function
cannot be selected).
* When the stacker is used, the ribbon saving function cannot be
designated.
: Designates tag rotation.
0: Printing bottom first
1: Printing top first
2: Mirror printing bottom first
3: Mirror printing top first
: Type of status response
0: No status response
1: Status response
- 115 -
[ESC] XS