TEC B-372-QP Manual page 147

(4) Feed speed
• Feed the paper at the designated speed. Ribbon saving and back feed also take
place at the same designated speed. However, the back feed speed in cut
mode or strip mode is 3"/sec.
• The possible feed speed varies according to types and sizes of supply. For
details, refer to the Supply Specification.
• The maximum possible feed speed in strip mode on the B-872/672 is 4"/sec.
Model
Parameter
1
2
3
4
5
6
7
8
9
A
(5) With/without ribbon
Without ribbon : The ribbon motor is not operated at feed.
With ribbon : The ribbon motor is operated at feed.
With ribbon saving: When the DIP switch is set to auto ribbon saving, ribbon
B-372/572 B-872
3"/sec 3"/sec
4"/sec
5"/sec
8"/sec 8"/sec
saving will be performed automatically.
When the option for no ribbon saving has been selected
or the DIP switch is set to no auto ribbon saving, no
ribbon saving will take place.
The B-672 does not contain the ribbon saving function.
This function cannot be selected.
When the stacker is used, the ribbon saving function
cannot be designated.
- 129 -
B-672
3"/sec
4"/sec
8"/sec