MODEL YEAR CHANGE
The following changes were made to the wiring harness for
1997 model year motorcycles.
New connectors and a different pin numbering sequence
for the right handlebar switch [P1] and the left handlebar
switch [P6]. See
HANDLEBAR SWITCHES
Longer wires leading to the horn to accommodate the
new mounting position.
CONNECTOR
NUMBER
[P1]
4-place connector
[P2]
2-place Amp Multilock
[P3]
12-place Amp Multilock
[P4]
4-place Amp Multilock
[P5]
2-place Amp Multilock
[P6]
8-place connector
[P7]
2-place Deutsch
[P8]
4-place PED
[P9]
4-slot fuse block
[P10]
8-place Deutsch
[P11]
8-place Amp Multilock
[P12]
4-place relay
[P13]
4-place relay
[P14]
2-place Amp Multilock
[P15]
2-place Amp Multilock
[P16]
3-place Deutsch
[P17]
2-place plug
www.PlanDeGraissage.org
WIRING HARNESS
on
page
33.
Table 3. Electrical Connectors
DESCRIPTION
right handlebar switch housing-ignition power, module and starter
front brake switch
instruments and indicator lamps
headlamp
clutch switch
left handlebar switch housing-horn, turn signals, lights
vacuum-operated electric switch
ignition/headlamp switch
four 15 amp fuses-ignition, instruments, lights and accessories
ignition module
tail lamp and rear turn signals
ignition relay
starter relay
side stand switch
license plate light
timer and pickup
voltage regulator
COMPONENT(S)
37