Table of Contents
Advertisement
REMOVAL/DISASSEMBLY
1.
Drain oil from oil tank.
2.
See
Figure 3-45.
Detach clamp (6) from oil hose. Move
rear shock rebound canister aside.
3.
Disconnect
feed
hose
connection (5).
4.
Carefully remove screws (1) and washers that secure
pump to crankcase. Pump will drop with screws
removed. Discard mounting gasket.
5.
Remove clamp and return hose connection (4).
5709
2
3
1
1.
Mounting screw and
washer (2)
2.
Cover screw and
washer (2)
3.
Feed hose connection
Figure 3-45. Oil Pump Hardware
6.
See
Figure 3-46.
Remove cover screws (2) and washers
(3). Lift cover (6) off body (12). Remove and discard O-
ring (14).
7.
Slide both pieces of feed gerotor set (7), separator plate
(8) and both pieces of scavenge gerotor set (9) off gear
shaft (11).
8.
Remove and discard retaining ring (16). Remove thrust
washer (15) and gear shaft (11).
www.PlanDeGraissage.org
(3)
and
oil
filter
mount
4
6
1
5
2
4.
Return hose
connection
5.
Oil filter mount
connection
6.
Clamp
b0055x3x
10
9
11
12
7
14
13
15
16
1
1.
Mounting screw, long (2)
2.
Cover screw, short (2)
3.
Washer (4)
4.
Connector
5.
Hose fitting
6.
Cover, oil pump
7.
Gerotor assembly,
feed pump
8.
Gerotor separator plate
Figure 3-46. Oil Pump
8
6
5
3
4
2
9.
Gerotor assembly,
scavenge pump
10. Mounting gasket
11. Gear shaft
12. Body, oil pump
13. Elbow
14. O-ring
15. Washer, thrust
16. Retaining ring
3-35
Advertisement
Table of Contents
