Buell S1 Lightning 1996 Manual page 43

INSPECTION
Check handlebar adjustment:
Before every ride.
1. See Figure 1-46. Check steering motion range to both
fork stops. Each handlebar should be spaced equally
between the windscreen and fuel tank and parts should
not make contact.
2. Handlebars should be equally spaced between outside
edge of handlebar clamp and inside edge of mirror
mounts.
If necessary, adjust handlebars as described below.
ADJUSTMENT
CAUTION
Never adjust handlebars using excessive force or dam-
age to handlebars might result.
1. Remove windscreen. See
2. Remove instrument support. See
TACHOMETER in Section 2.
3. See Figure 1-47. Loosen clamp screws.
4. Move handlebar to desired position.
5. Tighten clamp screws to 10-12 ft-lbs (13.6-16.2 Nm).
6. Install instrument support. See
TACHOMETER in Section 2.
7. Install windscreen. See WINDSCREEN
8. Check steering motion range to both fork stops. Each
handlebar should be spaced equally between wind-
screen and fuel tank and parts should not make contact.
If handlebar needs further adjustment, repeat
MENT beginning with Step 1.
www.PlanDeGraissage.org
HANDLEBARS
WINDSCREEN in Section 2.
SPEEDOMETER AND
SPEEDOMETER AND
in Section 2.
ADJUST-
5589
5590
Figure 1-46. Testing Handlebars
5576
Figure 1-47. Adjusting Handlebars
Clamp
1-33