Table of Contents
Advertisement
ITEM
GEARCASE
Cam gear shaft in
bushing (loose)
Cam gear shaft end play
(min) (except rear intake)
Rear intake cam gear shaft
end play (min)
FLYWHEEL
Runout
Flywheels at rim
Shaft at
flywheel end
End play
SPROCKET SHAFT BEARING
Outer race fit in
crankcase (tight)
Bearing inner race fit
on shaft (tight)
PINION SHAFT BEARINGS
Pinion shaft jounal diameter
Outer race diameter in
right crankcase
Bearing running clearance
Fit in cover bushing
(loose)
www.PlanDeGraissage.org
NEW COMPONENTS
0.0007-0.0022 in.
0.018-0.056 mm
0.005-0.024 in.
0.13-0.61 mm
0.006-0.024 in.
0.15-0.61 mm
0.000-0.010 in.
0.00-0.25 mm
0.000-0.002 in.
0.00-0.05 mm
0.001-0.005 in.
0.025-0.13 mm
0.0004-0.0024 in.
0.010-0.061 mm
0.0002-0.0015 in.
0.005-0.038 mm
1.2496-1.2500 in.
31.740-31.750 mm
1.5646-1.5652 in.
39.741-39.756 mm
0.00012-0.00088 in.
0.0030-0.0224 mm
0.0023-0.0043 in.
0.058-0.109 mm
SERVICE WEAR LIMITS
0.003 in.
0.08 mm
0.025 in.
0.64 mm
0.040 in.
1.02 mm
0.010 in.
0.25 mm
0.002 in.
0.05 mm
0.005 in.
0.13 mm
1.2496 in. (min)
31.375 mm (min)
1.5672 in. (max)
39.807 mm (max)
0.0050 in.
0.127 mm
3-3
Advertisement
Table of Contents
