Wiring Harness - Buell S1 Lightning Workshop Manual

MODEL YEAR CHANGE
The following changes were made to the wiring harness for
1997 model year motorcycles.
New connectors and a different pin numbering sequence
for the right handlebar switch [P1] and the left handlebar
switch [P6]. See HANDLEBAR SWITCHES
Longer wires leading to the horn to accommodate the
new mounting position.
CONNECTOR
NUMBER
[P1] 4-place connector
[P2] 2-place Amp Multilock
[P3] 12-place Amp Multilock
[P4] 4-place Amp Multilock
[P5] 2-place Amp Multilock
[P6] 8-place connector
[P7] 2-place Deutsch
[P8] 4-place PED
[P9] 4-slot fuse block
[P10] 8-place Deutsch
[P11] 8-place Amp Multilock
[P12] 4-place relay
[P13] 4-place relay
[P14] 2-place Amp Multilock
[P15] 2-place Amp Multilock
[P16] 3-place Deutsch
[P17] 2-place plug

WIRING HARNESS

on page 33.
Table 3. Electrical Connectors
DESCRIPTION
right handlebar switch housing-ignition power, module and starter
front brake switch
instruments and indicator lamps
headlamp
clutch switch
left handlebar switch housing-horn, turn signals, lights
vacuum-operated electric switch
ignition/headlamp switch
four 15 amp fuses-ignition, instruments, lights and accessories
ignition module
tail lamp and rear turn signals
ignition relay
starter relay
side stand switch
license plate light
timer and pickup
voltage regulator
COMPONENT(S)
37