Table of Contents
Advertisement
6
DISASSEMBLY
1.
Remove transmission assembly. See
CASE, REMOVAL
and drum as described under
DRUM
on
page
6-18.
2.
See
Figure 6-20.
Clamp transmission assembly in vise,
with protective jaws, as shown, to work on disassembly.
3.
See
Figure 6-21.
As each component is removed, place
it on a clean surface in the exact order of removal.
See
Figure 6-22.
Using
J-5586)
remove and discard retaining ring (5) next to counter-
shaft 5th gear (12). Slide countershaft 5th (12), mainshaft 2nd
(22) and countershaft 2nd (11) off end of shafts. Remove split
bearing (7) that was under gear (11) and thrust washer (6) on
the countershaft.
6-20
MAINSHAFT AND COUNTERSHAFT
TRANSMISSION
on
page
6-16. Remove shifter forks
SHIFTER FORKS AND
RETAINING RING PLIERS (Part No.
www.PlanDeGraissage.org
3552
Use protective jaws
when clamping in vise
Figure 6-20.
3559
Figure 6-21.
xlh0626
Figure 6-22.
Advertisement
Table of Contents
