Table of Contents
Advertisement
AC Output Check
1.
See
Figure 7-25.
Test AC output.
a.
Disconnect voltage regulator wiring at connector
[P17].
b.
Connect an AC voltmeter across both stator sockets.
c.
Run the engine at 2000 RPM. The AC output should
be 38-52 volts AC.
2.
Compare test results to specifications.
a.
If the output is below specifications, charging prob-
lem could be a faulty rotor or stator.
b.
If output is good, charging problem might be faulty
regulator/rectifier. Replace as required.
3.
Check the output again as described under
Voltage Output
Test.
7-28
Current and
www.PlanDeGraissage.org
5685a
Figure 7-25. Check Stator AC Voltage Output
Advertisement
Table of Contents
