Table of Contents
Advertisement
REMOVAL
1.
Remove seat and tail section. See
REMOVAL
in Section 2.
2.
See
Figure 7-39.
Remove screw from clamp.
3.
Remove turn signal flasher and detach both wires.
INSTALLATION
1.
See
Figure 7-39.
Connect both wires to flasher.
2.
Place flasher inside clamp so prongs on flasher face
inside and down.
3.
Install on flasher and clamp on frame with screw.
WARNING
Check for proper turn signal operation before riding
motorcycle. Visibility is a major concern for motorcy-
clists. Failure to have proper turn signal operation could
lead to personal injury.
4.
Check turn signals for proper operation.
7-38
TURN SIGNAL FLASHER
TAIL SECTION,
www.PlanDeGraissage.org
5682
Flasher
Figure 7-39. Turn Signal Flasher
Advertisement
Table of Contents
