Table of Contents
Advertisement
NOTE: There must be a minimum of 34-U unobstructed front-to-back usable rack space
when installing the MX2010 router into a four-post rack or cabinet.
2. Partially insert screws into the open holes in the rear flanges of the four-post mounting shelf (see
Figure 6 on page
11).
NOTE: Depending on the type of rack or cabinet you have, cage nuts might be required.
3. Tighten all the screws completely.
4. On the front of each front rack rail, partially insert a mounting screw into the holes in each ear of the
four-post mounting shelf.
5. Tighten all the screws completely.
10
Advertisement
Table of Contents
